EPDM lining to plywood gutters and to porch roofs on 5 Apartments              
  hover your mouse curser over the photo for the text

Apply Carlile 1.14mm epdm rubber membrane, fully adhered, to ten internal plywood gutters and to four plywood porch entry roofs.

stage 3 of the Seascape development at Paraparaumu Beach, Kapiti Coast overall view of the roofs
typical high sided internal gutter under construction typical low sided internal gutter under construction
Apt5, south side gutter ready for lining Apt5 south side gutter lined with epdm membrane 1100mm girth
ugly corner, but watertight a rare taped lap joint and view to the overflow pipe at the high end
Apt5 north side ready for lining Apt5 north side lined with epdm membrane 800mm girth one piece 12.5 metres long
Apt4 south side ready for lining membrane partially bonded
completed Apt4 south gutter looking east Apt4 south side lined with epdm membrane 1200mm girth, one piece, 14 metres long and joined to Apt5 gutter on top of parapet
Apt 4 north side gutter ready for lining Apt4 north side gutter lined with epdm membrane, one piece 900mm girth and 12.5 metres long
Apt3 south side gutter ready for lining Apt3 south side gutter lined with epdm membrane, 1000mm girth one piece, 13.6 metres long, top edge to have flashing installed and plaster finish above
Apt3 north side gutter ready for lining Apt3 north side gutter lined with epdm membrane, 900mm girth one piece, 12.3 metres long
Apt2 south side gutter ready for lining manouvering the membrane into position for glueing
applying the solvent based adhesive to the plywood and the membrane Apt2 south side lined with epdm membrane 1400mm girth, one piece, 13.6 metres long and joined to Apt3 gutter on top of parapet
Apt2 north side ready for lining Apt2 north side lined with epdm membrane, 900mm girth one piece, 12.3 metres long
the colorsteel metal roofing has arrived Apt1 south side gutter lined with epdm membrane, 1100mm girth one piece, 13 metres long, metal roof installed
a drip edge is fitted under the metal roofing and over the upstand of the epdm gutter Apt1 north end gutter lining being installed
Apt 1 gutter lined with epdm membrane 1100mm girth in 3 pieces, metal roof installed overall view of the apartment roofs and gutters
typical porch entry roof (1 of 4) ready for laying epdm membrane epdm membrane installed to porch roof, 2 cuts at gutter end with cover tape over
epdm membrane installed to typical porch roof, 2 cuts at wall and edge corners with cover tape over looking down on a typical porch roof, one piece with 4 cuts
roof after plastering and metal flashings installed, street end central section of roof and gutters with plaster and metal flashings completed
typical central level change at gutter looking east typical central level change at gutter looking west
another level transition with counterflashing and plaster installed to wall typical entry canopy with walls completed
overall view of roof looking north apartments almost ready for occupation