|
Island Bay Posted 08.10.02 hover your mouse curser over the photo for the text
TORCHON MINERAL OVERLAY TO EXISTING BUILTUP SMOOTH ASPHALT ROOF
Prime existing roof surface with Bitumen Resaturant Primer and allow to dry.
Cut open air blisters, re-heat with flame and reseal flat.
Fit high wind spec. SBS 100mm wide self adhesive tape to perimeter edges and nail at 150mm centres with large head Galv. Clouts
Apply 4 mm thick Red Coloured Mineral finished polymer modified Torchon membrane, fully bonded to the existing primed surface.
Dress membrane up to bottom of second weatherboard and seal with a bead of sealant.
Turndown into gutter and 100mm at other perimeter edges.
|