Homewood ReRoof hover your mouse curser over the photo for the text
Fit new watercheck to two sides of roof, and apply 3mm underlay over, welding to main roof. Cut open blisters in single layer torch membrane, heat and weld down flat. Lay 4mm base sheet and mechanically fix through to timber sarking with Scie roof washers and 50mm Stanless Steel screws. Torch 2nd layer 4mm Charcoal Granule surfaced Cap sheet to base sheet with offset laps. Weld to cleaned edge near wall and dress over watercheck.
Fit new Zincalume .44 gauge metal fascia/cap flashing.