|
Karaka Point Posted 03.01.02 hover your mouse curser over the photo for the text
Strip off existing BUR asphalt gravel roof membrane and dispose to tip.
Inspect timber substrate and refix any loose or twisted boards.
Lay Ruberoid Britorch 3 underlay, spot bonded by torch and mechanically fixed at 200mm staggered centres with 19mm large head Galvanised clout nails.
Form Britorch 3 up and over top of small nibs and dress down one side.
Apply 2nd layer, Ruberoid Britorch 4mm Blue/Grey Mineral membrane, fully bonded to the underlay, with joints offset from 1st layer
Form welted drip edge 3 sides with Britorch 4mm Blue/Grey Mineral membrane.
Work to be timed with low tide access.
|